Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Installation for Phoenix Homeowners
Garage door installation in Phoenix typically costs $700 to $2,200 for a standard single or double door, with custom wood and oversized steel doors running higher depending on dimensions, insulation, and hardware. Most installations take one day once the door arrives, and the price you’re quoted is the price you pay because it’s written down before any work starts. Servo Garage Doors Phoenix has served Phoenix homeowners since 2015 under The Haven Standard, which means every installation begins with a flat, written price and written scope, and ends with a documented photo record of what was installed and how it was left. Call (623) 404-9080 and a real person answers, day or night.
What Our Garage Door Installation Service Includes
Every Phoenix Garage Door Installation we do starts with a written price and a written scope of work. That’s Clause 1 of The Haven Standard, and it applies to every job, from a basic single-car replacement in Sun City to a custom wood door in Paradise Valley. You’ll know the total before we order anything. Here’s what each type of installation involves.
New Door Installation
A new door installation replaces the entire existing door, tracks, springs, and hardware as a matched system. You’d choose this when your current door is structurally compromised, outdated, or you want to move to an insulated model for Phoenix’s summer heat. We measure the opening, verify the mounting points, and install the new system so the door balances correctly from day one.
Single Car Door
Single-car garage doors in Phoenix are typically 8 or 9 feet wide and are common in older neighborhoods like Encanto and Arcadia. When we install a single car door, we verify the spring size matches the door weight, because an undersized spring is the fastest way to shorten a door’s life. We also set the travel limits on the opener so the door doesn’t slam or reverse unexpectedly.
Double Car Door
Double doors, usually 16 feet wide, carry more weight and need paired torsion springs rated for the full door mass, not the spring spec from a smaller door. In Phoenix, many double doors face west and absorb direct afternoon heat, which degrades hinges and rollers faster. We install double doors with hardware rated for the exposure and document the spring balance with photos before we leave.
Custom Garage Door
Custom doors are for openings that aren’t a standard size, or for homeowners in areas like Paradise Valley and Scottsdale who want a specific material, window layout, or finish. The process starts with a site measurement and a written quote that includes the door, hardware, track, springs, and installation labor as separate line items. You approve the full scope in writing before the door is ordered, so there are no surprises when the install crew arrives.
Steel Doors
Steel doors are the most common choice in Phoenix because they hold up to heat and impact while costing less than wood. We install steel doors with the appropriate insulation level for your garage: a south-facing garage in Tolleson benefits from a higher R-value than a shaded door in Litchfield Park. Every steel door we install includes a written warranty and a photo record of the finished installation.
Wood Doors
Wood garage doors need more careful handling in Phoenix’s dry climate, because low humidity causes the wood to shrink and move. We install wood doors with sealed edges and finish-recommended clearances so the panels don’t bind in the tracks during monsoon humidity swings. If you’re replacing a wood door in a historic district, we’ll note the existing hardware in the photo record so the written scope matches what was actually there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Installation
We install and service all eight major garage door brands, including Wayne Dalton, Craftsman, and Raynor. With Wayne Dalton doors, we pay close attention to the torque-master spring system, which is different from a standard torsion setup and needs careful winding. Our technicians have installed enough Wayne Dalton units across Phoenix to quote their hardware accurately before ordering anything.
Craftsman doors are common in homes built during the 1990s and 2000s, especially in the suburban corridors around Glendale and Tempe. Many of those original Craftsman systems are reaching end of life now, and we can match a replacement door to the existing opener when the opener is still in good shape. Raynor doors come through our shop less often, but we stock their spring and hinge parts and can install their full line, including the heavier steel models used on commercial-style residential garages in Scottsdale and Paradise Valley. Whether you have a Wayne Dalton, Craftsman, Raynor, or any other make, we quote the same way: a written price before work starts, every time.
BeforeAfterSigns You Need Garage Door Installation Right Now
- Broken or sagging panels. A bent panel isn’t just cosmetic; it changes the balance of the whole door and forces the springs and opener to work harder. If the panel damage is widespread or the door is more than 15 years old, replacing the door is usually cheaper than replacing panels one at a time.
- Wood rot or rust through the panel face. In Phoenix, rust on steel doors is less common than corrosion at the bottom edge where irrigation water splashes. Wood doors rot at the base where rainwater pools during monsoon storms. Once the structural skin is compromised, patching buys you months, not years.
- A door that visibly shakes or binds when opening. That shake means the tracks are misaligned or the panels have shifted on their hinges. If the door is original to a home built before 2005, the track and hardware may no longer be available as matching parts, and a new door system is the reliable fix.
- The door won’t stay open or closes too hard. A properly balanced door pauses when you stop it. If yours creeps down or slams, the springs are undersized or worn. Installing a new door means fresh springs matched to the actual door weight, not the previous owner’s guess.
- Your home insurance or HOA requires a replacement. Some Phoenix HOAs have updated their appearance standards in the last few years, and insurers sometimes require a newer door with a working auto-reverse. If you have a written notice, bring it to the estimate. We’ll match the required spec and put it in the written scope.
Our Garage Door Installation Process - Step by Step
- 1
Measure and inspect. We measure the opening width, height, side room, and headroom. These numbers determine what door sizes will actually fit, and we document them in writing. If you have an existing door, we photograph the current hardware and note what’s being reused and what’s being replaced.
- 2
Written quote and scope. You receive a flat, written price that includes the door, tracks, springs, hardware, labor, and disposal. This is Clause 1 of The Haven Standard and there are no exceptions. The quote is delivered before any work is scheduled, and the price doesn’t change once you approve it.
- 3
Order and schedule. Standard steel doors are often in stock through local Phoenix distributors and can be scheduled within a week. Custom and wood doors take longer because they’re built to order. We give you a written lead time and then confirm the installation date by text.
- 4
Install and balance. On install day, the technician mounts the tracks, hangs the door, winds the torsion springs to the correct torque for the door weight, and sets the opener travel limits. This is the step where cheap installers cut corners; we verify the balance by stopping the door at three heights and photographing the final spring settings for the record.
- 5
Documented closeout. Before we leave, we photograph the finished installation, the spring balance, the opener settings, and the work area. You receive the photo record along with the written warranty. Clause 4 of The Haven Standard is why the photos exist: you see what was done, not just a receipt that says it was.
How Much Does Garage Door Installation Cost in Phoenix?
A standard single-car steel door installation in Phoenix runs $700 to $1,400, while a double-car steel door typically falls between $1,000 and $2,200; see our Garage Door Installation cost guide for full details. Custom wood doors in areas like Paradise Valley and Scottsdale start around $1,800 and can exceed $4,000 depending on wood species, window inserts, and finish work. These numbers include labor and disposal, and they’re written down before any work begins.
What moves the price? Door width and height, insulation level, material, window panels, and whether the opener is being replaced at the same time. A door that requires new track or structural repair to the opening jamb adds cost, and we’ll show you that as a line item in the written scope, never as a surprise at the end. The best way to avoid overpaying is to get a detailed written estimate that separates the door cost from the labor, the hardware, and any extra work. Our free estimate includes all of that, plus a photo record of the existing condition so you can compare what we quoted against what was actually there.
For reference, related repair work in Phoenix costs less than a full installation: garage door repair runs $150 to $600, a panel replacement is $250 to $500, and track realignment is $120 to $240. If the repair estimate on an older door approaches half the cost of new, replacement is usually the better long-term decision.
Garage Door Installation Near Phoenix - Our Service Area
Servo Garage Doors Phoenix installs doors throughout the Valley, including Garage Door Installation in Glendale and Garage Door Installation in Paradise Valley, plus Scottsdale, Tempe, Sun City, Tolleson, El Mirage, Litchfield Park, and Guadalupe. Most installations are scheduled within the same week for in-stock doors. If you’re just researching, start with our home page to see exactly how the written-price system works before you schedule a measure.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Installation in Phoenix
Garage door installation is the complete replacement of your existing door, tracks, springs, and hardware with a new system matched to your opening size and weight. It’s different from repair, which fixes one component on the existing door. In Phoenix, installation is the right call when the door is structurally compromised, more than 15 years old, or when you want to upgrade to an insulated door for heat and noise reduction.
Most standard single and double door installations are completed in one day, typically four to six hours. Custom wood doors take longer to build, usually two to four weeks after you approve the written scope. We give you the lead time in writing at the estimate stage and confirm the install date by text.
In Phoenix, a new garage door installation runs $700 to $2,200 for standard steel doors, with custom wood doors starting around $1,800. The price depends on size, material, insulation, and whether you’re replacing the opener at the same time. Every quote from Servo is flat and written before we order anything; call (623) 404-9080 for an exact number for your opening.
Yes. We install and service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. If you have an existing LiftMaster opener and you’re replacing only the door, we’ll match the new door’s weight to the opener’s horsepower rating and note the compatibility in the written scope.
Installation is scheduled work, not emergency dispatch. If your door is damaged and you need it secured tonight, our 24/7 emergency line will send a technician to make the opening safe until a new door can be ordered. Call (623) 404-9080 and a person answers, not a recording.
Every installation carries the 365-Day Done Right Promise: if the installation isn’t right, we make it right. The specific warranty terms are written on your quote and your final work order, not hidden in fine print. The door manufacturer’s warranty is also included in your paperwork, and we document everything with photos.
Clear the garage floor about four feet from the door opening and park vehicles outside on install day. If your door has an opener, unplug it before we arrive or leave that to the technician during the disconnect step. We handle removal and disposal of the old door and leave the area swept before the photo closeout.
Schedule Your Garage Door Installation Service in Phoenix Today
You’ll get a written price and a written scope before any work begins, a documented photo record when the job is done, and a 365-day promise backing the whole thing. Call (623) 404-9080 for a free estimate and a measure from Marcus Deller and the team at Servo Garage Doors Phoenix. The price won’t change once you approve it.
Written by Marcus Deller, Owner at Servo Garage Doors Phoenix, serving Phoenix since 2015.